APC SmartUPS 2200VA LCD RM 2U SMT2200RM2UC ✅ ❤️️ ✅ ❤️️ Open Box ✅ ❤️️ ✅ ❤️️ For Sale

APC SmartUPS 2200VA LCD RM 2U SMT2200RM2UC
Fully functional. Missing accessories (serial cable, epo block, & rack mount brackets with screws). Unit has cosmetic scuffs, a cracked front bezel, and hums. Will not come in original box/packaging.

Designed for servers, point-of-sale, routers, switches, hubs, and other network devices, theSmart-UPS Battery Backup with SmartConnectfromAPCdelivers intelligent and efficient network power protection from entry level to scalable runtime. It can provide 370 minutes of use at 50W, 212 minutes of use at 100W, 110 minutes of use at 200W, 72 minutes of use at 300W, 53.4 minutes of use at 400W, 41.5 minutes of use at 500W, 33.6 minutes of use at 600W, 27.9 minutes of use at 700W, 23.7 minutes of use at 800W, 20.4 minutes of use at 900W, 17.7 minutes of use at 1000W, 13.8 minutes of use at 1200W, 11 minutes of use at 1400W, 9 minutes of use at 1600W, 7.4 minutes of use at 1800W, and 6.6 minutes of use at its full load of 1920W.

This Smart-UPS features an output of 1920W / 1920 VA, a NEMA 5-20P input connection, an input of 120V @ 50/60 Hz ±3 Hz, six NEMA 5-15R and two NEMA 5-20R battery backup outlets, a surge energy rating of 530 joules, line interactive topology, and a sine waveform. Included PowerChute Network Shutdown management software helps to provide unattended, yet proper shutdowns of network operating systems, and also included are rack-mounting support rails, an RS-232 cable, and a USB cable. Support is provided by a limited 3-year repair or replace warranty that excludes the battery, as well as a limited 2-year battery warranty and a limited lifetime $150,000 equipment protection policy.

APC SmartConnect makes the Smart-UPS more adaptable and easier to deploy, enabling you to view the status of your UPS through a secure web portal. Through this remote management interface, you'll receive automatic notifications, firmware updates, and advanced support.

FeaturesCold-Start CapableProvides temporary battery power when the utility power is out.Energy MeterProvides actual kilowatt hours of usage for energy conscious users.Green ModePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve higher operating efficiency without sacrificing protection.High Online EfficiencyReduces utility costs and generates less heat.Intuitive LCD InterfaceProvides clear and accurate information in multiple languages with the ability to configure the UPS locally with user-friendly navigation keys.Predictive Replace Battery DateDynamically provides the month and year when battery replacement is recommended to aide in long-term maintenance planning.Pure Sine Wave Output on BatterySimulates utility power to provide improved compatibility for active PFC (power factor corrected) servers and sensitive electronics.Single Switched Outlet GroupSingle outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off, and non-critical load shedding.SmartSlotCustomize UPS capabilities with management cards.Smart-UPS Features & Battery ChargingProlongs battery life by regulating the charge voltage according to battery temperature.Power ConditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.Intelligent Battery ManagementMaximizes battery performance, life, and reliability through intelligent, precision charging.Disconnected Battery NotificationWarns when a battery is not available to provide backup power.Automatic Self-TestPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Automatic Restart of Loads After UPS ShutdownAutomatically starts up the connected equipment upon the return of utility power.SafetySafety-Agency ApprovedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.ManageabilityDisconnected Battery NotificationWarns when a battery is not available to provide backup power.USB ConnectivityProvides management of the UPS via a USB port.Network ManageableProvides remote power management of the UPS over the network.LED Status IndicatorsQuickly understand unit and power status with visual indicators.Serial ConnectivityProvides management of the UPS via a serial port.Audible AlarmsActively lets you know if the unit is on battery, if the battery is low, or if there is an overload condition.AdaptabilityAdjustable Voltage-Transfer PointsMaximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.Adjustable Voltage SensitivityProvides the ability to adapt the UPS for improved performance in specific power environments or generator BatteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replaced.User-Replaceable BatteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing the Mean Time to Repair (MTTR).Resettable Circuit BreakersEnables a quick recovery from overload events.Predictive Failure NotificationProvides early-warning fault analysis ensuring proactive component replacement.Battery Failure NotificationProvides early-warning fault analysis on batteries enabling timely preventive maintenance.