Tripp-Lite SmartPro LCD Line-Interactive UPS, 1500VA 900W (SMART1500LCD) For Sale

Protect your network station, desktop computer, media center, and other electronic connected devices with the Tripp-Lite SmartPro LCD Line-Interactive UPS. This UPS (Uninterruptible Power Supply) provides reliable 1500VA/900W power protection against surges, blackouts, brownouts, and line noise that can destroy data and cause damage to electronics. As soon as it detects an issue it will switch to battery backup mode in milliseconds so that your connected equipment can run long enough to save files and be safely shutdown. Beside providing protection against surges, it supports up to 11.8 minutes of battery support at half load (450W) and 4.4 minutes of support at full load (900W). It provides an audible alarm to indicate loss of power and low battery, plus, it has a 6 ft. cord that can connect to any NEMA 5015R socket.

• Provides reliable 1500VA/900W power protection for electronic connected devices
• Up to 11.8 minutes of battery support at 50% (450W) and 4.4 minutes of support at full load (900W)
• 8 protected NEMA 5-15R outlets
• Rotatable LCD screen reports real-time UPS and power status
• Switches to battery backup mode in milliseconds, keeping equipment running long enough to save files and shut down safely
• Includes USB and DB9 communication ports and free PowerAlert software (download at Tripp-Lite SmartPro LCD Line-Interactive UPS features a rotatable LCD status screen with dimming functionality that provides status information in real time regarding operating mode, voltage info, load level, battery charge (percentage), and the estimated runtime in minutes. It also includes USB and DB9 communication ports and free PowerAlert software. The HID-compliant USB port easily integrates with built-in power management and auto-shutdown of Windows and Mac OS X. When used with Tripp Lite's PowerAlert free software, the USB and serial ports allow data to be saved during an unattended shutdown emergency. Contact closure messaging for AC Present and AC Fail status is also supported by the DB9 port.
  Other Features

  Automatic Voltage Regulation (AVR)

  Corrects under voltages as low as 75V and overvoltages as high as 147V without drawing battery backup power.

  AC Line, Tel/DSL and Ethernet Surge Suppression

  Surge suppression rating of 870 joules protects connected equipment and data from harmful power surges while built-in RJ-45 jacks protect single-line tel/DSL or network Ethernet connection.

  EMI/RFI Line Noise Filtering

  Removes electromagnetic and radio frequency interference that can disrupt or damage your equipment's performance.

  Outlets are Optimized

  Battery backup and protection against surges or spikes that are harmful to equipment and data is provided by (8) NEMA 5-15R outlets.

  Flexible Installation

  Features a NEMA 5-15P plug with 6-ft. (1.83 m) cord to connect to any NEMA 5-15R socket. Included are 2U brackets for rack-mount installation (2 or 4 post racks) and it can be installed vertically or horizontally with included mounting UPS

• USB Cable
• DB9 Serial Cable
• Telephone Cable
• Mounting your UPS indoors, away from excess moisture or heat, conductive contaminants, dust or direct sunlight.
• Leave adequate space around all sides of the UPS for proper ventilation.

• Manufacturer Part #: SMART1500LCD
• UPC: input current (Maximum Load): 8.6A
• Nominal Input Voltage(s) Supported: 120V AC
• UPS Input Connection Type: 5-15P; Right-Angled
• Input Circuit Breakers: 10A
• UPS Input Cord Length (ft.): 6
• Recommended Electrical Service: 15A 120V
• Input Phase: Volt Amp Capacity (VA): 1500
• Output Capacity (kVA): 1.5
• Output Watt Capacity (Watts): 900
• Output kW Capacity (kW): 0.9
• Power Factor: 0.6
• Nominal Voltage Details: 115v nominal output in battery mode
• Frequency Compatibility: 60 Hz
• Output Voltage Regulation (Line Mode): -18%, +8%
• Output Voltage Regulation (Battery Mode): 115V (± 5%)
• Output AC Waveform (AC Mode): Sine wave
• Output AC Waveform (Battery Mode): PWM sine wave
• Nominal Output Voltage(s) Supported: 110V; 115V; 120V
• Output Receptacles: (8) 5-15R
• Individually Controllable Load Banks: No

Surge/Noise Suppression

• UPS AC Suppression Joule Rating: 870
• UPS AC Suppression Response Time: Instantaneous
• UPS Dataline Suppression: 1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet
• UPS Dataline Suppression Details: 168 joules; Compatible with POE applications
• EMI / RFI AC Noise Suppression: Type: Valve Regulated Lead Acid (VRLA)
• Full Load Runtime (min.): 4.4 min. (900w)
• Half Load Runtime (min.): 11.8 min. (450w)
• Expandable Runtime: No
• DC System Voltage (VDC): 24
• Battery Recharge Rate (Included Batteries): Less than 4.5 hours from 10% to 90%
• Battery Access: Battery Access Door
• Internal UPS Replacement Battery Cartridge: RBC1500
• Battery Replacement Description:
• IMPORTANT BATTERY REPLACEMENT INFORMATION > If your SMART1500LCD UPS has no battery replacement door, please contact a local electronics repair technician to source and install a matching replacement battery; If your SMART1500LCD UPS is equipped with a battery access door, please order Tripp Lite RBC1500 (quantity 1) replacement battery Form Factor: Rackmount
• Cooling Method: Fan
• Included Mounting Accessory Description:
• Included mounting brackets enable installation in 2 and 4 post racks, plus upright tower configurations; Set of 4 rubber-feet enable no-slip horizontal desktop placement
• Installation Form Factors Supported with Included Accessories:
• 2 post 19 inch rackmount; 2 post front mount; 4 post 19 inch rackmount; Tower
• Minimum Required Rack Depth (inches): 13.5
• Primary UPS Depth (mm): 267
• Primary UPS Height (mm): 89
• Primary UPS Width (mm): 438
• Rack Height: 2U
• Shipping Dimensions (hwd / in.): 7.10 x 14.90 x 21.30
• Shipping Weight (lbs.): 31.90
• UPS Housing Material: ABS
• UPS Power Module Dimensions (hwd, in.): 3.5 x 17.25 x 10.5
• UPS Power Module Weight (kg): 13.61
• UPS Power Module Weight (lbs.): 30

Voltage Regulation

• Voltage Regulation Description: Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 75 to 147
• Overvoltage Correction: Input voltages between 128 and 147 are reduced by 12%
• Undervoltage Correction: Input voltages between 93 and 107 are boosted by 14%
• Severe Under Voltage Correction: Input voltages between 75 and 92 are boosted by Temperature Range: +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
• Storage Temperature Range: +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
• Relative Humidity: Up to 95%, non-condensing
• AC Mode BTU / Hr. (Full Load): 78
• AC Mode Efficiency Rating (100% Load): 98%
• Operating Elevation (ft.): 6562
• Operating Elevation (m): Monitoring Port Description:
• Supports detailed monitoring of UPS and site power conditions; DB9 provides contact-closure notification of AC Present (pins 1,9 connected) and AC Fail (pins 1,8 connected)
• PowerAlert Software:
• For local monitoring via the UPS's built-in communication ports, download PowerAlert Local software at Cable: USB and DB9 Serial cabling included
• WatchDog Compatibility: Supports Watchdog application, OS and hard-reboot restart options for remote applications
• Network Management Card Description: Network management not supported
• Communications Interface: Contact closure; DB9 Serial; USB (HID enabled)

User Interface, Alerts, and Controls

• Front Panel LCD Display:
• Backlit LCD screen offers detailed UPS status information, configuration options and Error message reporting; STATUS INFORMATION includes Input Voltage, Output Voltage, Estimated Runtime (minutes), Output Load Percentage, Output Load Wattage, Battery Charge Percentage, Graphical 5-Bar Battery Charge Level and UPS Operating Mode Display / CONFIGURATION OPTIONS include Power Sensitivity, LCD Status Information Scrolling, Alarm Disable, LCD Brightness and Self Test / REPORTED ERROR MESSAGES include Replace-Battery and Overload conditions; LCD Screen rotates for vertical or horizontal UPS button provides UPS on/off power control (long-press) and advances the LCD screen display (short tap); MUTE/ENTER button provides temporary alarm cancel, plus selection and confirmation of on-screen configuration options
• Alarm Cancel Operation:
• Press the MUTE/ENTER button during a power failure to silence the alarm; Once silenced, alarm will re-sound to indicate low-battery status
• Audible Alarm:
• Audible alarm indicates power-failure and low-battery status; Alarm can be disabled entirely via front panel LCD interface (see manual)
• LED Indicators: Front panel LCD Time: 4 milliseconds (AC to battery mode); 1 millisecond (Battery to AC mode)
• Low Voltage Transfer to Battery Power (Setpoint): 75
• High Voltage Transfer to Battery Power (Setpoint): 147

More Features

• Cold Start (Startup in Battery Mode During a Power Failure): Cold-start operation supported
• High Availability UPS Features: Automatic Voltage Regulation (AVR); Hot swappable batteries; Surge/noise protection
• Green Energy-Saving Features: Greater than 95% efficiency – GREEN UPS

Standards and Compliance

• Product Certifications: CSA (Canada); NOM (Mexico); UL 1778
• Product Compliance: RoHS; FCC Part 15 Class B Warranty Period (U.S. & Canada): 3-year limited warranty
• Connected Equipment Insurance (U.S., Canada & Puerto Rico): $250,000 Ultimate Lifetime Insurance