Tripp Lite AV550SC 550VA Audio/Video Backup Power Block UPS Wiring Enclosure NEW For Sale

The Tripp Lite 4 Outlet Backup Power Block provides the highest level of protection for structured cabling installations (ie. telephone, Internet and coax connections). With reliable battery backup, surge protection and EMI/RFI line noise filtering, this power block provides a complete protection solution for audio/video distribution systems by supporting modems, routers, RF amplifiers, network interfaces, cameras, modulators and other equipment through all power problems. In the event of a power failure, it includes an auto-restart feature that eliminates the need to perform an on-site restart. In addition, when a modem or router freeze-up occurs, the Power Block features a recycle/reset button with sequential outlet startup for proper modem and router rebooting.

• TPAV550SC backup power block
• Detachable 6 in. C14 power cord
• Owner’s manual

• 3 widely-spaced AC outlets (2 Auxiliary, 1 Modem)power, reset or start up connected equipment during a blackout or system freeze-up (provide battery backup, surge protection and EMI/RFI filtering) - 4 outlets total
• 60-second delay-on AC outlet (router) powers and resets the router during a blackout or system freeze-up and delays router start-up for proper system rebooting (provides battery backup, surge protection and EMI/RFI filtering)
• 12V DC (1-Amp) output connector provides an additional output power source for 12V DC devices as well as battery backup protection for 4 devices
• Recycle/reset button resets connected equipment during system freeze-ups with sequential outlet startup
• HD-compatible 2.2GHz coax jacks protect connected coax lines against surge damage and filter disruptive EMI/RFI line noise.
• Tel/modem/DSL jacks protect connected telephone,modem or DSL lines against surge damage and filter disruptive EMI/RFI line noise
• IEC power input connector accepts included 6-inch power cord
• Diagnostic/Overload LEDs: Alert users to potential power problems before they affect connected equipment.
• Resettable circuit breaker prevents dangerous system overloads
• Auto-restart capability eliminates the need to perform an on-site restart
• 550VA/300 watts standby UPS system
• Convenient installation designed to fit in the bottom left corner of structured wiring enclosures without the need for mounting screws or brackets
• Mounting screw holes are included on the back of the unit for convenient board, wall or ceiling mounting (for projectors)
• Customizable labels for easier cord/cable indentification and maintenance

• MPN:AV550SC POWER compatibility:120V AC
• Frequency volt amp capacity (VA): 550
• Output watt capacity (watts): 300
• Output nominal voltage: 120V AC
• Output voltage regulation: BATTERY MODE: PWM sine wave output 120V +/-5%
• Output frequency regulation: LINE MODE: passes line frequency of 60Hz +/-10% BATTERY MODE: Inverter output regulated to 60Hz +/-0.5Hz
• Outlet quantity / type: 4 NEMA 5-15R
• Overload protection: 10-amp input amps: 15A
• Input connection type: Detachable IEC320-C14 power cord
• Input cord length: 6 in.
• Recommended electrical service: 15A, load runtime: 3 minutes
• Half load runtime: 10 minutes
• DC system voltage: 12V DC
• Typical battery lifespan: 3-6 years, depending on usage
• Battery recharge rate: 15 hours (10% to 90% capacity)

• Front panel LEDs: 2 LEDs indicate power status and overload/check battery status
• Switches: Includes 1 on/off push button (also acts as recycle/reset button)

• AC surge suppression: 1038 joules
• AC suppression response time: instantaneous
• Dataline suppression: HD-compatible 2.2GHz coaxial and telephone/modem/DSL line surge protection
• EMI / RFI AC noise suppression: Dimensions (HWD/in): 8.35 x 6.78 x 2.97
• Material of construction: Metal
• Cooling method: Convection

• Transfer time from line power to battery mode: 2-4 milliseconds
• Low voltage transfer to battery power: Switches to battery power when line voltage decreases to 99 volts or less. Resets to line power mode when line voltage increases to 104 volts or higher.
• High voltage transfer to battery power: Yes