McAfee Stonesoft 1035-C1 1000 Series Firewall/VPN IPS/IDS Device w/ GE4B #360 For Sale

McAfee Stonesoft 1035 1000 Series Layer 2 Firewall/VPN IPS/IDS DeviceMade by McAfee/Stonesoft, part number 1035-C1.Comes with 1x GE4B 4-Port Gigabit Ethernet Copper Bypass Interface Module, and 1x standard power cord.We were not provided with the login information from the previous user. For sale is the item shown and described in this listing, no additional accessories included.
(rack mount are not included)Item has been tested to boot from console, and comes with 30 days warranty.More InformationConsole output as 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Date: 02/20/2013 10:45:47 Ver: Z623-009
Press <DEL> or <F2> to enter setup.Press any key to continue.
Press any key to continue.
Press any key to continue.Press any key to continue.Press any key to continue. GNU GRUB version 0.97 (619K lower / 3654808K upper memory)Press any key to continue.
Press any key to continue.
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| Use the ^ and v keys to select which entry is highlighted.
to edit the The highlighted entry will be booted automatically in 1 seconds.Booting \'Stonesoft Security Engine A: 5.4.5.9697\'GRUB Loading stage2...
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue. GNU GRUB version 0.97 (619K lower / 3654808K upper Boot SG Security Engine (partition A, SMP, console on 1st serial port>
|
| Switch to uniprocessor (UP) kernel |
| System restore options |
| |
Press any key to continue. |
| |
| |
| |
| |
| |
| Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, \'e\' to edit the
commands before booting, or \'c\' for a command-line. The highlighted entry will be booted automatically in 1 seconds. Booting \'Boot SG Security Engine (partition A, SMP, console on 1st serial por
t, 9600 8-N-1)\'root (hd0,1)[ 0.000000] Linux version 3.0.79+smp (root@rad-compile-2) (gcc version 4.6.1
(Debian 4.6.1-5stonesoft1) ) #1 SMP Wed May 22 16:22:02 UTC 2013
[ 0.000000] Command line: root=/dev/ram0 init=/linuxrc SGSIDE=A crashkernel=6
4M@0M console=tty0 console=ttyS0,9600 SGCONS_1L=0 SGCONS_0S=0,96009600
[ 0.000000] BIOS-provided physical RAM map:]
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
[ 0.000000] BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000df226000 (usable)
[ 0.000000] BIOS-e820: 00000000df226000 - 00000000df26a000 (reserved)
[ 0.000000] BIOS-e820: 00000000df26a000 - 00000000df272000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000df272000 - 00000000df328000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000df328000 - 00000000df3cc000 (reserved)
[ 0.000000] BIOS-e820: 00000000df3cc000 - 00000000df3cd000 (usable)
[ 0.000000] BIOS-e820: 00000000df3cd000 - 00000000df410000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000df410000 - 00000000df800000 (usable)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed45000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fd5f0] fd5f0
[ 0.000000] init_memory_mapping: 0000000000000000-00000000df800000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] RAMDISK: 37a05000 - 37ff0000
[ 0.000000] Reserving 64MB of memory at 816MB for crashkernel (System RAM: 46
08MB)
[ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000df26b068 00054 (v01 ALASKA A M I 01072009 A
MI 00010013)
[ 0.000000] ACPI: FACP 00000000df270ef8 000F4 (v04 ALASKA A M I 01072009 A
MI 00010013)
[ 0.000000] ACPI: DSDT 00000000df26b150 05DA4 (v02 ALASKA A M I 00000000 I
NTL 20051117)
[ 0.000000] ACPI: FACS 00000000df31ff80 00040
[ 0.000000] ACPI: APIC 00000000df270ff0 00068 (v03 ALASKA A M I 01072009 A
MI 00010013)
[ 0.000000] ACPI: FPDT 00000000df271058 00044 (v01 ALASKA A M I 01072009 A
MI 00010013)
[ 0.000000] ACPI: SSDT 00000000df2710a0 00098 (v01 AMICPU PROC 00000001 M
SFT 03000001)
[ 0.000000] ACPI: MCFG 00000000df271138 0003C (v01 ALASKA A M I 01072009 M
SFT 00000097)
[ 0.000000] ACPI: HPET 00000000df271178 00038 (v01 ALASKA A M I 01072009 A
MI. 00000005)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] NODE_DATA [000000011fffb000 - 000000011fffffff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009a
[ 0.000000] 0: 0x00000100 -> 0x000df226
[ 0.000000] 0: 0x000df3cc -> 0x000df3cd
[ 0.000000] 0: 0x000df410 -> 0x000df800
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] Allocating PCI resources starting at df800000 (gap: df800000:1f51
c000)
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_
ids:1
[ 0.000000] PERCPU: Embedded 24 pages/cpu @ffff88011fc00000 s69352 r8192 d207
60 u1048576
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pag
es: 1029791
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/ram0 init=/linuxrc SGSIDE=A crashk
ernel=64M@0M console=tty0 console=ttyS0,9600 SGCONS_1L=0 SGCONS_0S=0,9600
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 3977936k/4718592k available (4540k kernel code, 534908k a
bsent, 205748k reserved, 2726k data, 652k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] NR_IRQS:1280
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.010000] Detected 1299.832 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer fr
equency.. 2599.66 BogoMIPS (lpj=12998320)
[ 0.128015] pid_max: default: 32768 minimum: 301
[ 0.183617] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes
)
[ 0.271450] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.356465] Mount-cache hash table entries: 256
[ 0.410936] CPU: Physical Processor ID: 0
[ 0.458868] ENERGY_PERF_BIAS: Set to \'normal\', was \'performance\'
[ 0.458870] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.614934] mce: CPU supports 6 MCE banks
[ 0.662847] CPU0: Thermal monitoring enabled (TM1)
[ 0.720093] using mwait in idle threads.
[ 0.767056] Freeing SMP alternatives: 16k freed
[ 0.821202] ACPI: Core revision 20110413
[ 0.872292] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 1.044022] CPU0: Intel(R) Celeron(R) CPU @ 1.30GHz stepping 07
[ 1.225995] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU dri
ver.
[ 1.315788] ... version: 3
[ 1.363689] ... bit width: 48
[ 1.412630] ... generic registers: 4
[ 1.460532] ... value mask: 0000ffffffffffff
[ 1.524019] ... max period: 000000007fffffff
[ 1.587507] ... fixed-purpose events: 3
[ 1.635409] ... event mask: 000000070000000f
[ 1.699078] NMI watchdog enabled, takes one hw-pmu counter.
[ 1.765826] Booting Node 0, Processors #1 Ok.
[ 1.995414] NMI watchdog enabled, takes one hw-pmu counter.
[ 2.062091] Brought up 2 CPUs
[ 2.097597] Total of 2 processors activated (5199.64 BogoMIPS).
[ 2.170421] xor: automatically using best checksumming function: generic_sse
[ 2.295037] generic_sse: 5812.800 MB/sec
[ 2.346042] xor: using function: generic_sse (5812.800 MB/sec)
[ 2.415830] NET: Registered protocol family 16
[ 2.469263] ACPI: bus type pci registered
[ 2.517408] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xef
ffffff] (base 0xe0000000)
[ 2.628796] PCI: not using MMCONFIG
[ 2.670445] PCI: Using configuration type 1 for base access
[ 2.742350] bio: create slab <bio-0> at 0
[ 2.954468] raid6: int64x1 1144 MB/s
[ 3.164268] raid6: int64x2 1452 MB/s
[ 3.374098] raid6: int64x4 1359 MB/s
[ 3.583922] raid6: int64x8 1052 MB/s
[ 3.793710] raid6: sse2x1 3478 MB/s
[ 4.003507] raid6: sse2x2 4330 MB/s
[ 4.213330] raid6: sse2x4 4983 MB/s
[ 4.258167] raid6: using algorithm sse2x4 (4983 MB/s)
[ 4.321259] ACPI: Executed 1 blocks of module-level executable AML code
[ 4.404413] ACPI: SSDT 00000000df327d18 00056 (v01 AMI CST 00000001 M
SFT 03000001)
[ 4.503786] ACPI: Dynamic OEM Table Load:
[ 4.551913] ACPI: SSDT (null) 00056 (v01 AMI CST 00000001 M
SFT 03000001)
[ 4.651308] ACPI: Interpreter enabled
[ 4.695106] ACPI: (supports S0 S5)
[ 4.735940] ACPI: Using IOAPIC for interrupt routing
[ 4.795306] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xef
ffffff] (base 0xe0000000)
[ 4.906778] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI mot
herboard resources
[ 5.093585] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 5.173718] ACPI: No dock devices found.
[ 5.220584] PCI: Using host bridge windows from ACPI; if necessary, use \"pci=
nocrs\" and report a bug
[ 5.330162] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 5.404482] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af]
[ 5.483593] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7]
[ 5.562767] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df]
[ 5.641945] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 5.721126] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bfff
f]
[ 5.808615] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dfff
f]
[ 5.896082] pci_root PNP0A08:00: host bridge window [mem 0xfe000000-0xfefffff
f]
[ 5.985198] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can
enable it with \'pcie_aspm=force\'
[ 6.104842] pci 0000:00:01.0: PCI bridge to [bus 01-04]
[ 6.167466] pci 0000:02:01.0: disabling ASPM on pre-1.1 PCIe device. You can
enable it with \'pcie_aspm=force\'
[ 6.287212] pci 0000:02:01.0: disabling ASPM on pre-1.1 PCIe device. You can
enable it with \'pcie_aspm=force\'
[ 6.406932] pci 0000:01:00.0: PCI bridge to [bus 02-04]
[ 6.481312] pci 0000:02:01.0: PCI bridge to [bus 03-03]
[ 6.561238] pci 0000:02:02.0: PCI bridge to [bus 04-04]
[ 6.641166] pci 0000:00:01.1: PCI bridge to [bus 05-05]
[ 6.704070] pci0000:00: Requesting ACPI _OSC control (0x15)
[ 6.771935] pci0000:00: ACPI _OSC control (0x15) granted
[ 6.840040] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 6.925665] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 7.011410] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 7.097007] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 7.182628] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *
0
[ 7.270430] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *
0
[ 7.358232] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *
0
[ 7.446032] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 7.531791] vgaarb: loaded
[ 7.564335] SCSI subsystem initialized
[ 7.609341] usbcore: registered new interface driver usbfs
[ 7.674937] usbcore: registered new interface driver hub
[ 7.738535] usbcore: registered new device driver usb
[ 7.799174] PCI: Using ACPI for IRQ routing
[ 7.863861] Switching to clocksource hpet
[ 7.911930] pnp: PnP ACPI init
[ 7.948498] ACPI: bus type pnp registered
[ 7.996921] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
[ 8.075988] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 8.155057] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 8.234129] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 8.313206] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 8.392509] system 00:02: [io 0x0a00-0x0a1f] has been reserved
[ 8.463367] system 00:02: [io 0x0a30-0x0a3f] has been reserved
[ 8.535183] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 8.606428] system 00:0b: [io 0x0400-0x047f] has been reserved
[ 8.677213] system 00:0b: [io 0x1180-0x119f] has been reserved
[ 8.747960] system 00:0b: [io 0x0500-0x057f] has been reserved
[ 8.818720] system 00:0b: [mem 0xfed20000-0xfed8ffff] could not be reserved
[ 8.901951] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 8.981025] system 00:0b: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 9.064255] system 00:0b: [mem 0xfed08000-0xfed08fff] has been reserved
[ 9.143330] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
[ 9.222836] pnp: PnP ACPI: found 13 devices
[ 9.272806] ACPI: ACPI bus type pnp unregistered
[ 9.335842] pci 0000:00:01.0: BAR 9: assigned [mem 0xfe800000-0xfebfffff 64bi
t pref]
[ 9.428492] pci 0000:00:01.0: BAR 7: assigned [io 0x2000-0x3fff]
[ 9.501411] pci 0000:01:00.0: BAR 9: assigned [mem 0xfe800000-0xfebfffff 64bi
t pref]
[ 9.593982] pci 0000:01:00.0: BAR 7: assigned [io 0x2000-0x3fff]
[ 9.666823] pci 0000:02:02.0: BAR 9: assigned [mem 0xfe800000-0xfe9fffff 64bi
t pref]
[ 9.759405] pci 0000:02:02.0: BAR 7: assigned [io 0x2000-0x2fff]
[ 9.832246] pci 0000:02:01.0: BAR 9: assigned [mem 0xfea00000-0xfebfffff 64bi
t pref]
[ 9.924827] pci 0000:02:01.0: BAR 7: assigned [io 0x3000-0x3fff]
[ 9.997667] pci 0000:02:01.0: PCI bridge to [bus 03-03]
[ 10.060115] pci 0000:02:01.0: bridge window [io 0x3000-0x3fff]
[ 10.132959] pci 0000:02:01.0: bridge window [mem 0xfe400000-0xfe4fffff]
[ 10.214109] pci 0000:02:01.0: bridge window [mem 0xfea00000-0xfebfffff 64bi
t pref]
[ 10.306697] pci 0000:02:02.0: PCI bridge to [bus 04-04]
[ 10.369139] pci 0000:02:02.0: bridge window [io 0x2000-0x2fff]
[ 10.441983] pci 0000:02:02.0: bridge window [mem 0xfe300000-0xfe3fffff]
[ 10.523135] pci 0000:02:02.0: bridge window [mem 0xfe800000-0xfe9fffff 64bi
t pref]
[ 10.615720] pci 0000:01:00.0: PCI bridge to [bus 02-04]
[ 10.678163] pci 0000:01:00.0: bridge window [io 0x2000-0x3fff]
[ 10.751005] pci 0000:01:00.0: bridge window [mem 0xfe300000-0xfe4fffff]
[ 10.832161] pci 0000:01:00.0: bridge window [mem 0xfe800000-0xfebfffff 64bi
t pref]
[ 10.924745] pci 0000:00:01.0: PCI bridge to [bus 01-04]
[ 10.987187] pci 0000:00:01.0: bridge window [io 0x2000-0x3fff]
[ 11.060029] pci 0000:00:01.0: bridge window [mem 0xfe300000-0xfe5fffff]
[ 11.141180] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfebfffff 64bi
t pref]
[ 11.233765] pci 0000:00:01.1: PCI bridge to [bus 05-05]
[ 11.296211] pci 0000:00:01.1: bridge window [io 0xe000-0xefff]
[ 11.369053] pci 0000:00:01.1: bridge window [mem 0xfe600000-0xfe6fffff]
[ 11.450206] pci 0000:00:01.1: bridge window [mem 0xfef00000-0xfeffffff 64bi
t pref]
[ 11.542803] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.622911] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.703027] pci 0000:02:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 11.783138] pci 0000:02:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 11.863251] pci 0000:00:01.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.943494] NET: Registered protocol family 2
[ 11.995818] IP route cache hash table entries: 131072 (order: 8, 1048576 byte
s)
[ 12.084416] TCP established hash table entries: 524288 (order: 11, 8388608 by
tes)
[ 12.176426] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 12.256808] TCP: Hash tables configured (established 524288 bind 65536)
[ 12.335923] TCP reno registered
[ 12.373443] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 12.445271] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 12.522589] NET: Registered protocol family 1
[ 12.574742] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 12.675771] pci 0000:00:1d.0: PCI INT A disabled
[ 12.731087] Trying to unpack rootfs image as initramfs...
[ 12.927110] Freeing initrd memory: 6060k freed
[ 12.981982] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 13.059029] Placing 64MB software IO TLB between ffff8800db226000 - ffff8800d
f226000
[ 13.151604] software IO TLB at phys 0xdb226000 - 0xdf226000
[ 13.219811] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 13.270905] msgmni has been set to 7781
[ 13.316736] async_tx: api initialized (async)
[ 13.368934] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2
53)
[ 13.457410] io scheduler noop registered (default)
[ 13.552456] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 13.649611] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 13.742939] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 13.809983] Linux agpgart interface v0.103
[ 13.861307] brd: module loaded
[ 13.897858] Compaq SMART2 Driver (v 2.6.0)
[ 13.946875] HP CISS Driver (v 3.6.26)
[ 13.990938] Uniform Multi-Platform E-IDE driver
[ 14.045774] ide_generic: please use \"probe_mask=0x3f\" module parameter for pr
obing all legacy ISA IDE ports
[ 14.354251] Refined TSC clocksource calibration: 1299.999 MHz.
[ 14.424053] Switching to clocksource tsc
[ 14.853886] ide0: no devices on the port
[ 14.900857] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 15.553259] ide1: no devices on the port
[ 15.600250] ide1 at 0x170-0x177,0x376 on irq 15
[ 15.654533] ide-gd driver 1.18
[ 15.691044] ide-cd driver 5.00
[ 15.728161] Adaptec aacraid driver 1.1-7[28000]-ms
[ 15.785511] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 15.867043] DC390: clustering now enabled by default. If you get problems loa
d
[ 15.953379] with \"disable_clustering=1\" and report to maintainers
[ 16.033580] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 200
6)
[ 16.121075] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 16.204368] megasas: 00.00.05.38-rc1 Wed. May. 11 17:00:00 PDT 2011
[ 16.279428] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 16.352363] 3ware Storage Controller device driver for Linux v1.26.02.003.
[ 16.434624] 3ware 9000 Storage Controller device driver for Linux v2.26.02.01
4.
[ 16.522268] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 16.603594] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x10 im
pl SATA mode
[ 16.701424] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio
slum part ems apst
[ 16.807264] scsi0 : ahci
[ 16.837682] scsi1 : ahci
[ 16.868116] scsi2 : ahci
[ 16.898541] scsi3 : ahci
[ 16.928879] scsi4 : ahci
[ 16.959346] ata1: DUMMY
[ 16.988618] ata2: DUMMY
[ 17.017816] ata3: DUMMY
[ 17.047011] ata4: DUMMY
[ 17.076212] ata5: SATA max UDMA/133 abar m2048@0xfe704000 port 0xfe704300 irq
45
[ 17.165352] tun: Universal TUN/TAP device driver, 1.6
[ 17.299702] Fusion MPT base driver 3.04.19
[ 17.348684] Copyright (c) 1999-2008 LSI Corporation
[ 17.407068] Fusion MPT SPI Host driver 3.04.19
[ 17.460208] Fusion MPT FC Host driver 3.04.19
[ 17.512374] Fusion MPT SAS Host driver 3.04.19
[ 17.565584] Initializing USB Mass Storage driver...
[ 17.623960] usbcore: registered new interface driver usb-storage
[ 17.695824] USB Mass Storage support registered.
[ 17.751033] usbcore: registered new interface driver ums-usbat
[ 17.820947] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0
x64 irq 1,12
[ 17.921723] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 17.981052] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 18.041564] mousedev: PS/2 mouse device common for all mice
[ 18.108327] rtc_cmos 00:07: RTC can wake from S4
[ 18.110903] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 18.111300] ata5.00: ATA-7: TS8GCFX500, 20120725, max UDMA/133
[ 18.111304] ata5.00: 15465744 sectors, multi 0: LBA
[ 18.111846] ata5.00: configured for UDMA/133
[ 18.111986] scsi 4:0:0:0: Direct-Access ATA TS8GCFX500 2012 PQ
: 0 ANSI: 5
[ 18.112245] sd 4:0:0:0: [sda] 15465744 512-byte logical blocks: (7.91 GB/7.37
GiB)
[ 18.112303] sd 4:0:0:0: [sda] Write Protect is off
[ 18.112335] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, does
n\'t support DPO or FUA
[ 18.114510] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
[ 18.844244] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 18.917213] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 18.998425] hpet1: lost 4 rtc interrupts
[ 19.000505] sd 4:0:0:0: [sda] Attached SCSI disk
[ 19.100892] md: raid1 personality registered for level 1
[ 19.164472] md: raid6 personality registered for level 6
[ 19.227950] md: raid5 personality registered for level 5
[ 19.291440] md: raid4 personality registered for level 4
[ 19.354927] cpuidle: using governor ladder
[ 19.404175] usbcore: registered new interface driver usbhid
[ 19.470791] usbhid: USB HID core driver
[ 19.516751] IPv4 over IPv4 tunneling driver
[ 19.567351] TCP cubic registered
[ 19.606044] NET: Registered protocol family 10
[ 19.659684] NET: Registered protocol family 17
[ 19.712791] 802.1Q VLAN Support v1.8
[ 19.756343] Freeing unused kernel memory: 652k freed
Starting Stonesoft Engine...
udevd-work[1231]: device node \'/dev/input/mice\' already exists, link to \'/dev/in
put/mice\' will not overwrite itudevd-work[1231]: device node \'/dev/net/tun\' already exists, link to \'/dev/net/t
un\' will not overwrite it[ 20.283412] EXT3-fs: barriers not enabled
[ 20.510269] kjournald starting. Commit interval 5 seconds
[ 20.510305] EXT3-fs (sda8): warning: checktime reached, running e2fsck is rec
ommended
[ 20.669492] EXT3-fs (sda8): using internal journal
[ 20.726734] EXT3-fs (sda8): recovery complete
[ 20.780001] EXT3-fs (sda8): mounted filesystem with writeback data mode
Stonesoft Engine: changing rootfs to /dev/discs/disc0/part5
[ 22.076545] udev[1518]: starting version 164
[ 22.127640] hpet1: lost 2 rtc interrupts
[ 22.174519] hpet1: lost 2 rtc interrupts
[ 22.221484] hpet1: lost 2 rtc interrupts
[ 22.268451] hpet1: lost 2 rtc interrupts
[ 22.315418] hpet1: lost 2 rtc interrupts
[ 22.362382] hpet1: lost 2 rtc interrupts
[ 22.409352] hpet1: lost 2 rtc interrupts
[ 22.456318] hpet1: lost 2 rtc interrupts
[ 22.503286] hpet1: lost 2 rtc interrupts
[ 22.734345] ehci_hcd: USB 2.0 \'Enhanced\' Host Controller (EHCI) Driver
[ 22.812515] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23[ 22.897996] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 22.960501] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus numbe
r 1
[ 23.049042] ehci_hcd 0000:00:1d.0: debug port 2
[ 23.107234] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe705000
[ 23.183403] stonegate_drop_all: module license \'Proprietary\' taints kernel.
[ 23.266691] Disabling lock debugging due to kernel taint
[ 23.330282] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 23.399264] hub 1-0:1.0: USB hub found
[ 23.444061] hub 1-0:1.0: 2 ports detected
[ 23.805787] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 24.026473] hub 1-1:1.0: USB hub found
[ 24.071520] hub 1-1:1.0: 6 ports detected
[ 25.431567] Adding 965624k swap on /dev/discs/disc0/part7. Priority:-1 exten
ts:1 across:965624k SSStarting to check /dev/discs/disc0/part8
SG_data has gone 403 days without being checked, check forced. P[ 27.053594] E
XT3-fs: barriers not enabled
ass 1: Checking [ 27.105361] kjournald starting. Commit interval 5 seconds
inodes, blocks, [ 27.188392] EXT3-fs (sda8): using internal journal
and sizes Pass 2[ 27.261085] EXT3-fs (sda8): mounted filesystem with journal d
ata mode
: Checking direc
Starting to check /dev/discs/disc0/part9
SG_spool: recovering journal SG_spool has gone 4[ 35.506296] udev[1581]: renam
ed network interface eth1 to eth1_2
66 days without [ 35.596310] udev[2303]: renamed network interface eth3 to eth
1_0
being checked, check forced. Pas[ 35.706112] udev[1577]: renamed network inter
face eth0 to eth1_3
s 1: Checking in[ 35.796097] udev[2297]: renamed network interface eth2 to eth
1_1
odes, blocks, and sizes Pass 2: [ 35.899019] EXT3-fs: barriers not enabled
Checking directo[ 35.952706] udev[2310]: renamed network interface eth4 to eth
0_0
[ 36.004361] kjournald starting. Commit interval 5 seconds
ry structure Pas[ 36.107026] EXT3-fs (sda9): using internal journal
s 3: Checking di[ 36.179732] EXT3-fs (sda9): mounted filesystem with ordered d
ata mode
rectory connecti[ 36.285863] udev[2314]: renamed network interface eth5 to eth
0_1
[ 36.365561] udev[2322]: renamed network interface eth7 to eth0_3
[ 36.465566] udev[2318]: renamed network interface eth6 to eth0_2
SG: Crash dumping enabled, loading dump kernel...
[ 38.410063] sshd (2469): /proc/2469/oom_adj is deprecated, please use /proc/2
469/oom_score_adj instead.
SG: Crash dumping enabled successfully...
[ 40.153613] igb: Using 2 bytes of RSS hash
[ 40.244190] ADDRCONF(NETDEV_UP): eth1_3: link is not ready
[ 40.309771] 8021q: adding VLAN 0 to HW filter on device eth1_3
[ 40.573243] igb: Using 2 bytes of RSS hash
[ 40.663798] ADDRCONF(NETDEV_UP): eth1_2: link is not ready
[ 40.729452] 8021q: adding VLAN 0 to HW filter on device eth1_2
[ 40.992863] igb: Using 2 bytes of RSS hash
[ 41.083360] ADDRCONF(NETDEV_UP): eth1_1: link is not ready
[ 41.148931] 8021q: adding VLAN 0 to HW filter on device eth1_1
[ 41.412491] igb: Using 2 bytes of RSS hash
[ 41.502978] ADDRCONF(NETDEV_UP): eth1_0: link is not ready
[ 41.568618] 8021q: adding VLAN 0 to HW filter on device eth1_0
[ 41.951555] igb: Using 2 bytes of RSS hash
[ 42.042012] ADDRCONF(NETDEV_UP): eth0_0: link is not ready
[ 42.107592] 8021q: adding VLAN 0 to HW filter on device eth0_0
[ 42.491068] igb: Using 2 bytes of RSS hash
[ 42.581477] ADDRCONF(NETDEV_UP): eth0_1: link is not ready
[ 42.647086] 8021q: adding VLAN 0 to HW filter on device eth0_1
[ 43.030679] igb: Using 2 bytes of RSS hash
[ 43.121083] ADDRCONF(NETDEV_UP): eth0_2: link is not ready
[ 43.186685] 8021q: adding VLAN 0 to HW filter on device eth0_2
[ 43.570198] igb: Using 2 bytes of RSS hash
[ 43.660580] ADDRCONF(NETDEV_UP): eth0_3: link is not ready
[ 43.726180] 8021q: adding VLAN 0 to HW filter on device eth0_3
Calculating default memory configuration.
Measured capacity: 2598
[ 49.853071] udev[2323]: renamed network interface eth0 to eth0_3
[ 51.919672] Starting StoneGate Engine in IPS role.
[ 51.976943] SG: Tunnels=60000 Sessions=360000 Malloc=32768 (Totalram=40802959
36, Max kernelram=4080295936) Cache line: 64
[ 52.183696] SG: Using more memory for connection monitoring
[ 52.289160] Starting Stonesoft Inspection Packet Interface in IPS role.
[ 52.368295] NET: Registered protocol family 27
Stonesoft Security Engine IPS started: Wed Dec 9 12:38:16 PST 2015
Stonesoft Engine version 5.4.5.9697 (x86_64)
[ 57.263869] iface: max_conns=629951
[ 60.753467] SG: Checking configuration for policy=0
[ 61.152357] SG: Configuration for policy=0 is now locked
[ 61.544009] igb: Using 2 bytes of RSS hash
[ 61.633860] ADDRCONF(NETDEV_UP): eth0_0: link is not ready
[ 61.699455] 8021q: adding VLAN 0 to HW filter on device eth0_0
[ 61.825306] SG: Committing configuration for policy=0
[ 62.111473] SG: Configuration for policy=0 is now activated
[ 63.163025] igb: Using 2 bytes of RSS hash
Autocontact to Installation Server is disabled
Stonesoft Security Engine x86_64 ST126_1035-IPS /dev/tts/0ST126_1035-IPS Please read the following terms of sale carefully.
These terms constitute a legally binding agreement (contract) between the seller and buyer.
By offerding on, or purchasing, the product posted in this listing, the winning buyer agrees to and accepts all of the terms of sale stated below. TERMS OF SALE:

• Only what is shown in the photo and mentioned in the listing is included, anything else should be understood to not be included.
• For sale is for the item only, no service or tech support are included, but if you have a question feel free to ask and we\'ll answer if we can.
• All sales are final, please understand that this is an sale/liquidation environment, not a retail store, so make sure the item is right for you, before offerding.

PAYMENT:

• We accept payment by Paypal, and we only ship to the address which the buyer provides within the Paypal payment, no exceptions.
• If you would like to pay with a non-Paypal payment method, please contact us before offerding to see if we can arrange something.
  
• Buyers are given 7 days from winning offer to pay, and payment is expected of all winning buyers
  
• If no payment is made within 7 days, an unpaid item reminder will be filed with , and the buyer forfeits the sale win.
• We are required by state law to collect sales tax on all items shipping to a CA address.
• CA sales tax may be waived at our discretion, but only with a valid CA resale certificate - please contact us for resale exception *before* sending payment.
  

DOMESTIC (US) SHIPPING:

• Local pickup is normally not available; exceptions are sometimes made, but only for higher-value orders. Please contact us first to see if we can make this arrangement for you, don\'t assume that we will be able to.
  
• We charge flat-rate shipping, and there is no extra cost to ship to AK, HI, PR, or PO boxes, these are all fine.
• Shipping cost includes packaging cost including time and materials, and also includes shipping insurance (either through carrier, or self-insure); we guarantee delivery to the address you provided, or else a refund if the carrier loses the package.
  
• Smaller items will normally ship USPS and heavier items will normally ship Fedex Ground.
• Heavier items going to AK, HI, PR, APO/FPO, or PO boxes will ship via USPS parcel post
  
• All items must be shipped using our shipping account, we don\'t use anyone else\'s account to ship items.
• Packages valued $250 or more will ship with signature required upon delivery.
  
• We cannot normally offer expedited or express shipping. If this is something that you crucially need, please contact us *before* offerding to see if we can do this for you.
• Items will normally ship within 2 business days from the date of payment clearing (but most items will ship the next business day).
• You can typically expect to receive your item in under a week for smaller items, or 5-9 days for larger heavier items shipping ground delivery.
• Combined shipping: take $3 off shipping for each sale won after the first, if the items are paid for together.

FREIGHT SHIPPING:

• Oversized items (150+ LBs) may be picked up locally, or may be shipped freight, but scheduling the freight shipment is buyer\'s responsibility.
• Scheduling a freight shipment may be done at freightquote.com, or another freight broker or carrier, only a credit card is required.
  
• Freight shipping is from zip code 95134, commercial location, forklift available for loading, and outgoing shipments may be scheduled from 12 noon-6pm on weekdays.
• We can prepare the shipment for you upon request, palletizing, strapping down, and/or shrinkwrapping, there is a $25 palletizing fee.
• Bill of lading must be provided to us at least 24 hrs in advance of scheduling shipment, and ship-to address must match the shipping address in your Paypal payment.
  

INTERNATIONAL SHIPPING:

• International buyers, please contact us about the possibility of international shipping, prior to offerding/purchasing, not all items may be shipped internationally.
• International buyers are responsible for additional costs of international shipping: shipping cost and also import duties / taxes of your country of residence.
• International shipping cost is NEVER refundable for any reason. Please only offer if you understand this.
  

WARRANTY:

• All of our items are guaranteed to arrive working normally, and they come with warranty.
• If there is any problem with your order we will provide a replacement item or a refund, but we ask that you return the item PROMPTLY, please try to return it within 2 weeks, and should be received by us at the very latest 30 days after when you received the package.
  
• After 30 days we cannot accept any returns, unfortunately, so please check your purchase promptly and let us know if there happens to be any issue.
• Buyer is fully responsible for return shipping.
  
• Items must be returned in the same condition as shipped, with all included items - returning the item damaged or dismantled will void the warranty.
• We do not cross-ship, or ship any replacement, before the item is returned to us.
• Once the item is returned, we will ship a replacement item, if it\'s available.
• If a replacement isn\'t available, a full refund, including original shipping & handling charges, will be given.

response:

• Before leaving neutral or negative response, please email instead, all issues can be fixed by communicating, we prefer to have satisfied customers

COMMUNICATION:

• All communication is by email only, not phone - please use the \"Ask seller a question\" link in the sale page.
• All reasonable emails will be replied to, please allow 24-48 hours for a response, and check your email filter if you don\'t see a reply within 48 hours.
• Saturday, Sunday, and holidays are not business days so no reply should be expected during the weekend.
  

Thank you for your patronage.